Toro power max 826 OXE - Replacing the Drive Belts; Replacing the Headlight Bulb

Figure60
1.Dischargechutelatch
2.Gearteeth
Note:Thelatchisspringloadedandwillnaturally
moveintotheteethofthegear(Figure60).
4.Removeanyslackinthecablebypullingthecable
conduitrearward.
5.Tightentheboltonthecableclamp,beingcarefulnot
tostriptheplasticpart.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt
becomesworn,oil-soaked,orotherwisedamaged,havean
AuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlightBulb
UseaGE89937Whalogenlightbulb.Donottouchthe
bulbwithyourhandsorallowdirtormoisturetocomeinto
contactwiththebulb.
1.Removethewireconnectorfromthebackofthe
headlight(Figure61).
Figure61
2.Turnthebaseofthebulbcounterclockwiseuntilit
stops(Figure62).
Figure62
3.Removethebulbstraightoutfromthebackofthe
headlight(Figure63).
Figure63
4.Insertanewbulbintothebackoftheheadlight(Figure
64).
Figure64
5.Turnthebaseofthebulbclockwiseuntilitissnug
(Figure65).
Figure65
6.Insertthewireconnectorstraightintothebackofthe
headlightuntilitissecurelyinplace(Figure66).
26