Toro Reelmaster 5610 - Operation Procedures; Before Operation Safety

JackingPoints
Note:Supportthemachinewithjackstands
wheneveryouworkunderthemachine.
•Front—rectangularpad,undertheaxletube,
insideeachfronttire(Figure36).
g031850
Figure36
1.Frontjackingpoint
•Rear—rectangularaxletubeontherearaxle.
PushingorTowingthe
Machine
Inanemergency,themachinecanbemoved
byactuatingthebypassvalveinthevariable
displacementhydraulicpumpandpushingortowing
themachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)becauseinternal
transmissiondamagemayoccur.Thebypass
valvemustbeopenwheneveryoupushortow
themachine.
1.Thebypassvalveislocatedontheleftsideof
thehydrostat(Figure37).Rotatethebolt1-1/2
turnstoopenandallowuidtobypassinternally.
Note:Youcannowmovethemachineslowly
withoutdamagingthetransmission.
g003995
Figure37
1.Bypassvalve
2.Closethebypassvalvebeforestartingthe
engine.However,donotexceed7to11N∙m.(5
to8ft-lb)torquetoclosethevalve.
Important:Runningtheenginewiththe
bypassvalveopencausesthetransmission
tooverheat.
30