Reelmaster 6500–D/6700–D
Page 4 – 90
Hydraulic System
25. Put the bearing spacer onto the face of the upper
cover plate (Fig. 106).
26. Lightly grease the roller thrust bearing and put it on
the upper cover plate, inside the bearing spacer
(Fig. 107).
27. Inspect the exposed face of the drive plate making
sure it is clean and lint free. Apply a small amount of
clean multi–purpose grease on the drive plate
(Fig. 108).
Figure 106
Figure 107
Figure 108
To Next Page
Loading...
