Toro® - SnowMaster® Service Manual 3-1
Chassis
3
Table of Contents
CHASSIS
1. Upper Handle
2. Lower Handle
3. Personal Pace® Handle
4. Transmission Cable
5. Upper Rotor Cable
6. Lower Rotor Cable
All slack must be removed from the traction cable
before cable is secured. Transmission cable to be
adjusted so 2.50 ± .05 in. of conduit sticks out past
cable anchor. Rear wheels should spin freely in
both forward and reverse without Personal Pace®
engagement and should lock with Personal Pace®
engagement.
Rotor cable is to be adjusted so 1.00 ± .05 in. of
conduit sticks out past cable anchor. Ensure there is
slack in cable after adjustment to ensure brake still
functions.
1
2
Figure 11
Handles and Controls
To Next Page
Loading...
Need help?
General
