Decal 132-0869 is for models with MyRide only .
decal132-0869
132-0869
Note: This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator ’ s Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. W arning—read the
Operator's Manual .
3. Cutting/dismemberment
hazard of the hand, mower
blade; entanglement
hazard of the hand,
belt—stay away from
moving parts; keep all
guards and shields in place.
5. T ipping hazard—do not
use dual ramps when
loading onto a trailer; use
1 ramp wide enough for
the machine; use a ramp
with a slope less than 15°;
back up the ramp when
loading the machine and
drive forward of f the ramp
when unloading.
7. T ipping hazard—do not use
the machine near drop-of fs
or on slopes greater than
15°; only operate across
slopes less than 15°.
2. W arning—read the
Operator's Manual before
performing maintenance;
engage the parking brake,
remove the key , and
disconnect the spark plug.
4. Thrown object
hazard—keep bystanders
away; pick up debris
before operating; keep the
deector in place.
6. Runover hazard—do not
carry passengers; look
behind you when mowing
in reverse.
10
To Next Page
Loading...
Need help?
General
