Toro TimeCutter 5000 User Manual

• Use extra care while operating with accessories or
attachments, such as grass-collection systems.
These can change the stability of the machine
and cause a loss of control. Follow directions for
counterweights.
• If possible, keep the deck lowered to the ground
while operating on slopes. Raising the deck while
operating on slopes can cause the machine to
become unstable.
g2291 1 1
Figure 15
1. Safe Zone—use the
machine here on slopes
less than 15° or at areas.
4. W = Width of the machine
2. Danger Zone—use a
walk-behind mower and/or
a hand trimmer on slopes
greater than 15° and near
drop-of fs or water .
5. Keep a safe distance
(twice the width of the
machine) between the
machine and any hazard.
3. W ater
T owing Safety
• Do not attach towed equipment except at the hitch
point.
• Do not use the machine as a towing vehicle unless
it has a hitch installed.
• Do not exceed the weight limits for towed
equipment and towing on slopes. The towed
weight must not exceed the weight of the machine
and operator .
• Never allow children or others near the towed
equipment.
• On slopes, the weight of the towed equipment may
cause loss of traction, increased risk of rollover ,
and loss of control. Reduce the towed weight and
slow down.
• The stopping distance may increase with the
weight of a towed load. T ravel slowly and allow
extra distance to stop.
• Make wide turns to keep the attachment clear of
the machine.
Operating the Mower
Blade-Control Switch (PT O)
The blade-control switch (PT O) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PT O)
g008945
Figure 16
Note: Always engage the blades with the throttle in
the F AST position ( Figure 17 ).
g295538
Figure 17
Disengaging the Blade-Control
Switch (PT O)
g009174
Figure 18
20

Toro TimeCutter 5000 Specifications

General

Brand	Toro
Model	TimeCutter 5000
Category	Lawn Mower
Language	English