Toro TimeCutter 5000 - Positioning the Seat; Adjusting the Myride Suspension System

Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable ( Figure 9 or Figure
10 ).
g027632
Figure 9
Machines with MyRide
g293874
Figure 10
Machines without MyRide
Adjusting the MyRide®
Suspension System
Machines with MyRide Only
Y ou can adjust the MyRide® suspension system for a
smooth and comfortable ride. The slots for adjusting
the suspension have detent positions for reference,
ranging from a soft to a rm ride ( Figure 1 1 ).
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P ARK
position.
2. Shut of f the engine, remove the key , and wait
for all moving parts to stop before leaving the
operating position.
3. Step of f the machine.
4. While standing on the right side of the machine,
move the adjustment lever left toward the –
symbol for a softer suspension.
Move the adjustment lever right toward the +
symbol for a rmer suspension.
g292102
Figure 1 1
1. MyRide adjustment lever 3. Firmer suspension
2. Softer suspension
17