EasyManua.ls Logo

Toro TimeCutter 5000 - Page 35

Toro TimeCutter 5000
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
g027539
Figure 37
5. Slowly pour approximately 80% of the specied
oil into the ller tube and slowly add the
additional oil to bring it to the Full mark ( Figure
38 ).
g235264
Figure 38
6. Dispose of the used oil at a recycling center .
Changing the Engine-Oil Filter
Service Interval : Every 200 hours —Change the
engine-oil lter (more often in dirty
or dusty conditions).
1. Drain the oil from the engine; refer to Changing
the Engine Oil ( page 32 ) .
2. Change the engine-oil lter ( Figure 39 ).
g027477
Figure 39
Note: Ensure that the oil-lter gasket touches
the engine, and then turn the oil lter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil ( Figure 38 ).
33

Table of Contents

Other manuals for Toro TimeCutter 5000

Related product manuals