Toro TimeCutter 5000 - Page 9

decal121-2989b
121-2989
1. Bypass lever position for
pushing the machine
2. Bypass lever position for
operating the machine
decal130-0731
130-0731
1. W arning—thrown object
hazard; keep the deector
shield in place.
2. Cutting hazard of hand or
foot, mower blade—keep
away from moving parts.
decal132-0872
132-0872
1. Thrown object
hazard—keep bystanders
away from the machine.
3. Severing hazard of hand
or foot—keep away from
moving parts.
2. Thrown object hazard,
raised deector—do not
operate the machine with
an open deck; use a
bagger or a deector .
4. Entanglement
hazard—keep away
from moving parts; keep
all guards and shields in
place.
Decal 138-6074 is molded into the fuel tank.
decal138-2456
138-6074
1. Read the Operator ’ s
Manual .
3. Do not overll the fuel
tank.
2. Park the machine on a
level surface when lling
the fuel tank.
decal139-2388
139-2388
1. Slow
3. Fast
2. Hauling
Decal 139-2391 is for machines without an hour meter .
decal139-2391
139-2391
1. Fast
2. Slow
7