Toro TimeCutter 75748 - Pushing the Machine by Hand

PushingtheMachineby
Hand
Thismachinehasanelectric-brakemechanism,
andtopushthemachine,thekeymustbeinthe
RUNposition.Thebatteryneedstobechargedand
functioningtodisengagetheelectricbrake.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutofftheengineandwaitforallmovingparts
tostopbeforeleavingtheoperatingposition.
3.Locatethebypassleversontheframeonboth
sidesoftheengine.
4.Movebothbypassleversforwardthroughthe
slottedholeanddowntolocktheminplace
(Figure25).
WARNING
Contactwithhotsurfacesmaycause
personalinjury.
Keepyourhands,feet,face,clothing
andotherbodypartsawaytheengine,
muferandotherhotsurfaces.
WARNING
Themachinecouldunintentionallymove
whilethebypassleversarelocked
forwardintheslotandinjureyouor
bystanders.
Lockthebypassleversrearwardafter
movingthemachine.
g333873
Figure25
1.Bypass-leverlocations
3.Leverpositionforpushing
themachine
2.Leverpositionfor
operatingthemachine
5.TurntheignitionkeytotheRUNpositionand
disengagetheparkingbrakebymoving1
motion-controlleveroutofthePARKposition.
Note:Donotstartthemachine.
6.Movethemachineasrequired.
Important:Alwayspushthemachineby
hand.Donottowthemachine,because
towingmaydamageit.
7.Movethemotion-controlleversoutwardtothe
PARKposition.
8.TurnthekeytotheOFFpositionandremoveitto
avoiddrainingthebatterycharge.
9.Movebothbypassleversrearwardanddown
throughtheslottedholetolocktheminplace.
24