Toro TIMECUTTER HD 75211 - Page 75

5-30
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
CHASSIS
Park Brake Handle Assembly (Cont.)
Installation
1. Assemble the bushings and wave spring over the bolt and through the park brake handle (Figure 37).
NOTE: Verify alignment before tightening, misalignment can damage the wave washer (Figure 38).
Park Brake Hardware Orientation
A
B
C
D
E
Figure 37
Figure 38
A. Screw
B. Washer
C. Wave Washer
D. Flange Pivot
E. Flange Nut
A
B
C
D
E
F
G
A. Cotter Pin
B. Intermediate Brake Rod
C. Torx Screw
D. Flange Bushing
E. Wave Spring
F. Brake Flanged Bushing
G. Flange Nut