EasyManuals Logo

Toro TimeCutter Z420 User Manual

Toro TimeCutter Z420
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Battery Symbols
Some or all of these symbols are on your battery
1. Explosion hazard 6. Keep bystanders a safe
distance from the battery.
2. No re, open ame, or
smoking.
7. Wear eye protection;
explosive gases can cause
blindness and other injuries
3. Caustic liquid/chemical
burn hazard
8. Battery acid can cause
blindness or severe burns.
4. Wear eye protection
9. Flush eyes immediately
with water and get medical
help fast.
5. Read the Operator’s
Manual.
10. Contains lead; do not
discard.
110-6567
1. Warning—read the Operator’s Manual.
2. Warning—read the instructions before servicing or performing maintenance; move the motion control levers to the brake position,
remove the ignition key and disconnect the spark plug wire.
3. Cutting/dismemberment hazard, mower blade; entanglement hazard, belt—do not open or remove safety shields while engine is
running.
4. Loss of traction/control hazard, slopes—loss of traction/control on a slope, disengage the blade control switch (PTO), proceed
off the slope slowly.
5. Crushing/dismemberment hazard of bystanders, reversing; crushing/dismemberment hazard of bystanders—do not carry
passengers, look behind and down when reversing.
6. Tipping hazard—do not mow up and down slopes, only mow across slopes less than 15 degrees, avoid sudden and sharp
turns while on slopes.
7. Thrown object hazard—keep bystanders a safe distance from the machine, pick up debris before operating, keep deector in place.
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro TimeCutter Z420 and is the answer not in the manual?

Toro TimeCutter Z420 Specifications

General IconGeneral
Cutting Width42 inches
Ground Speed Forward7 mph
Ground Speed Reverse3 mph
Deck TypeFabricated
Fuel Capacity3 gal
TransmissionHydrostatic
Cutting Height1.5 - 4.5 in
Transmission SystemHydrostatic
Warranty3-year limited

Related product manuals