EasyManua.ls Logo

Toro TimeCutter ZX480 - Servicing the Engine Oil; Checking the Engine Oil Level; Oil Type and Capacity

Toro TimeCutter ZX480
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 22
1. Air cleaner cover 4. Slot
2. Air cleaner assembly
5. Housing
3. Tabs 6. Air cleaner cover knob
Servicing the Engine Oil
Chec k the oil lev el daily or after ev er y 8 hours .
Chang e the oil after the first 5 operating hours and
ev er y 50 operating hours thereafter .
Oil T ype: Deterg ent oil (API ser vice SF , SG , SH,
SJ , or higher)
Crankcase Capacity:
60 oz./1-7/8 qt. (1.8 l) when the filter is not
c hang ed;
64 oz./2 qt. (1.9 l) when the filter is c hang ed
Viscosity: See the table belo w .
Figure 23
Checking the Oil Level
1. P ark the mac hine on a lev el surface and
diseng ag e the blade control (PTO).
2. Mo v e the motion control lev ers to the brak e
position, stop the engine , remo v e the k ey , and
w ait for all mo ving par ts to stop before lea ving
the operating position.
3. Clean around the oil dipstic k ( Figure 24 ) so
that dir t cannot fall into the fill hole and
damag e the engine .
Figure 24
1. Oil dipstick 3. Oil drain
2. Filler tube
4. Unscrew the oil dipstic k and wipe the metal
end clean ( Figure 25 ).
23

Related product manuals