Toro TimeMaster 20976 - Battery Charging for Maintenance

DANGER
Ifyouallowabladetowear,aslotwill
formbetweenthesailandatpartofthe
blade.Eventuallyapieceoftheblade
maybreakoffandbethrownfromunder
thehousing,possiblyresultinginserious
injurytoyouorbystanders.
•Inspectthebladeperiodicallyforwear
ordamage.
•Nevertrytostraightenabladethat
isbentorweldabrokenorcracked
blade.
•Replaceawornordamagedblade.
3.Checkforbentblades;refertoCheckingfor
BentBlades(page24).
CheckingforBentBlades
1.Rotatethebladestothepositionshownin
Figure43.
g016532
Figure43
1.Frontofcuttingdeck3.Measurefromthecutting
edgetoasmooth,level
surface
2.MeasureatlocationsA
andB
2.Measurefromalevelsurfacetothecutting
edgesatlocationsAandB(Figure43),and
recordbothdimensions.
3.Rotatethebladessothattheiroppositeends
areatlocationsAandB(Figure43).
4.Repeatthemeasurementsinstep2andrecord
them.
Note:Ifthedifferencebetweenthedimensions
AandBobtainedinsteps2and4exceeds3
mm(1/8inch),thebladeisbentandyouwill
needtoreplaceit.RefertoRemovingtheBlades
(page25)andInstallingtheBlades(page25).
WARNING
Abladethatisbentordamagedcouldbreak
apartandcouldseriouslyinjureorkillyouor
bystanders.
•Alwaysreplaceabentordamagedblade
withanewblade.
•Neverleorcreatesharpnotchesinthe
edgesorsurfacesofablade.
24