Toro TITAN Max - Caster Assembly and Bearing Replacement

CasterAssemblyandBearingReplacement
CasterAssemblyandBearingRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Raiseandsupporttheunitsothatthefrontwheelsareofftheground,block
rearwheels.
4.Usingahammerandatheadscrewdriver,removethegreasecap.
g342953
Figure19
5.Supporttheundersideofthecasterfork,andremovethe(0.313-18NCx
0.750inch)screwandwashersecuringthecasterforktotheframe.
g342955
Figure20
6.Removethecasterforkfromthemainframe.Inspectthecasterforkshaft
forwearordamage.
7.Usingapunchandhammer,removetheupperandlowerbearingsfrom
theaxle.
Chassis:ServiceandRepairs
Page5–8
TITAN®MaxServiceManual
3442-428RevA