Toro TITAN Max - Park Brake Handle Assembly Replacement

ChokeControlAssemblyInstallation(continued)
6.Placethez-bendofthechokecableinthechokeplateontheenginein
thepositionpreviouslynoted.
7.Placethecableunderthecableclamp.
8.Ensurethatthechokecontrolleverispresseddownfullyandtightenthe
cableclamp.
g344320
Figure59
9.Installtherearguardtothemainframe.
10.Installthe4(5/16-18x23/4inch)torxscrews,4(5/16-18inch)nuts,2
(0.312-18x1.000inch)carriagescrews,and2(5/16-18inch)nutssecuring
therearguardtothemainframe.Torqueallfastenersto24.29±3.95N
•m(215±35in-lb).
11.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
12.Verifytheproperfunctionoftheunit.
ParkBrakeHandleAssemblyReplacement
ParkBrakeHandleAssemblyRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Releasetheparkingbrake(parkbrakehandledown).
4.Removetheleftconsole.LeftConsoleRemoval(page5–13)
5.Removethelockingcotterpinsecuringtheupperbrakelinkagetothepark
brakelever.
6.Tocompletelyremovetheupperbrakelinkage,removethelockingcotterpin
fromthebrakeshaftandremovetheclevispin.Thelinkagecannowbe
removedfromtheframeslotforinspection,adjustment,orreplacement.
7.Removethe(0.375-16x1.500inch)screwand(3/8-16inch)angenutfrom
theparkbrakeleverassembly.
Chassis:ServiceandRepairs
Page5–30
TITAN®MaxServiceManual
3442-428RevA