Toro TITAN Max - Choke Control Assembly Replacement

ThrottleCableAssemblyInstallation(continued)
13.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
14.Verifytheproperfunctionoftheunit.
ChokeControlAssemblyReplacement
ChokeControlAssemblyRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Removethe4(5/16-18x23/4inch)torxscrews,4(5/16-18inch)nuts,2
(0.312-18x1.000inch)carriagescrews,and2(5/16-18inch)nutssecuring
therearguardtothemainframe.
4.Loosentheclampsecuringthechokecabletothechokeplateontheengine.
g344320
Figure58
5.Removethechokecablefromtheplate,notingthepositionofthecable
intheplate.
6.Removethecontrolpanelassemblyfromtherightconsole.RightConsole
Removal(page5–16)
7.Onthebottomsideofthecontrolpanelassembly,loosenthejamnut
securingthechokeleverinplace.Removethenutfromthechokecable.
8.Pullthechokecableassemblythroughthecontrolpanelandoutofthe
machine.
ChokeControlAssemblyInstallation
1.RoutethechokecablethroughtherightconsolebetweentheROPSandthe
hydraulicuidreservoir,underthefuelandventlines,andundertheelectrical.
2.Threadthejamnutoverthechokecableuptothecontrolpanelassembly
3.Attachthechokecableassemblytothecontrolpanelwiththejamnut.
4.Installthecontrolpanelassemblyintotherightconsole.RightConsole
Installation(page5–18)
5.Movethechokecontrollevertotheopenposition(down).
TITAN®MaxServiceManual
Page5–29
Chassis:ServiceandRepairs
3442-428RevA