Toro TITAN Max - Page 64

ThrottleCableAssemblyInstallation(continued)
g336055
Figure56
4.Installthethrottlecablefromthethrottleplate.
5.Movethethrottlecontrollevertotheslowidleposition.
6.Placethez-bendofthethrottlecableinthethrottleplateontheenginein
thepositionpreviouslynoted.
7.Placethecableunderthecableclamp.
8.Tightentheclampsecuringthethrottlecabletothethrottleplate.
g344236
Figure57
9.Installthe4(5/16-18x23/4inch)torxscrews,4(5/16-18inch)nuts,2
(0.312-18x1.000inch)carriagescrews,and2(5/16-18inch)nutssecuring
therearguardtothemainframe.Torqueallfastenersto24.29±3.95N
•m(215±35in-lb).
10.Installthe2(10-24x1/2inch)screwsand2(10-24inch)nutssecuringthe
throttlecableassemblytothecontrolpanelassembly.
11.Installthecontrolpanelassemblyontotherightconsole.RightConsole
Installation(page5–18)
12.Ensurethatthethrottlecontrolleverisintheslowidlepositionandtighten
thecableclamp.
Chassis:ServiceandRepairs
Page5–28
TITAN®MaxServiceManual
3442-428RevA