Toro TITAN Max - Throttle Cable Assembly Replacement

RollOverProtectionSystem(ROPS)Installation(continued)
3.TorquetheROPSconnectinghardwareto122–135.58N•m(90–100ft-lb).
4.Iftheleftandrightconsoleswereremoved,installtheleftandrightconsoles.
LeftConsoleInstallation(page5–15)RightConsoleInstallation(page5–18)
5.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
ThrottleCableAssemblyReplacement
ThrottleCableAssemblyRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Removethecontrolpanelassemblyfromtherightconsole.RightConsole
Removal(page5–16)
4.Removetheknobfromthethrottlelever.
g336055
Figure53
5.Removethe2(10-24x1/2inch)screwsand2(10-24inch)nutssecuringthe
throttlecontrolassemblytothecontrolpanelassembly.
6.Removethe4(5/16-18x23/4inch)torxscrews,4(5/16-18inch)nuts,2
(0.312-18x1.000inch)carriagescrews,and2(5/16-18inch)nutssecuring
therearguardtothemainframe.
7.Loosentheclampsecuringthethrottlecabletothethrottleplate.
Chassis:ServiceandRepairs
Page5–26
TITAN®MaxServiceManual
3442-428RevA