Toro TITAN Max - Page 99

HydrostaticDriveTransmissionInstallation(continued)
3.Installthe2(0.312-18x2.250inch)frontand2(5/16-18x4.75inch)rear
hydromountingscrews,washers,and(5/16-18inch)nuts.Donottighten
atthistime.
4.Torquethecrossshaftscrewto61±6.779N•m(43±5ft-lb).
5.Tightentherearhydromountingscrew.
6.Tightenthe2axlehornscrew.
7.Tightenthefronthydromountingscrew.
8.Removetheprotectivecapfromthehydraulicoilnipple(ifinstallinganew
hydrostaticdrive).Installthehydraulicuidhose,andmovethehoseclamp
intoplace.
9.Connectthelowerbrakelinkagetothetransmission.
10.Connectthebypassarm.
11.Connectthemotioncontrollinkage.
Note:Attachthemotioncontrollinkageasshownwiththeoffsettoward
theoutsideofthemachine.
g336199
Figure105
12.Installthehydrostaticdrivebeltontothemachine.HydrostaticDriveBelt
Installation(page7–8)
13.Installthedeckdrivebeltontothemowerdeck.DeckDriveBeltInstallation
(page6–12)
14.Verifythatthe(3/4-16inch)hubnutistorquedto325.4-352.5N•m(240–260
lb-ft).
15.Installthedrivewheelandtorquethelugnuts.T orquethenutsto122–135.58
N•m(90–100ft-lb).
16.AddhydraulicoiltothereservoirtotheFULLCOLDline.
17.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
TITAN®MaxServiceManual
Page7–7
HydrostaticDriveSystem:ServiceandRepairs
3442-428RevA