Toro TITAN MX4880 - Premaintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

Premaintenance
Procedures
RaisingtheSeat
Makesurethemotioncontrolleversaretheneutrallock
positionandparkingbrakeisset.Liftandholdthelever
behindtheseatforwardtodisengagetheseatlatchand
thenlifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraising
theseat:
•Servicedecal
•Fuses
•Batteryandcables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseall
lubricationpoints.
GreaseType:No.2GeneralPurposeLithiumBase
Grease
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
neutralposition,settheparkingbrake,stopthe
engine,removethekey,andwaitforallmovingparts
tostopbeforeleavingtheoperatingposition.
3.Cleanthegreasettings(
Figure34andFigure33)
witharag.Makesuretoscrapeanypaintoffofthe
frontofthetting(s).
G009949
1
Figure34
1.Frontcastertire
4.Connectagreaseguntoeachtting(Figure34and
Figure33).Pumpgreaseintothettingsuntilgrease
beginstooozeoutofthebearings.
5.Wipeupanyexcessgrease.
33