Toro TITAN ZX4820 - Connecting the Battery; Setting Up the Motion Control Levers and the Seat

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
ConnectingtheBattery
NoPartsRequired
Procedure
1.Locatethebatteryandnegativebatterycableinthe
centerofthemachine.
2.Removetheblackplasticcapfromthenegative
batterypost.Removethefastenersfromthenegative
batterycableandusethemtosecurethenegative
batterycabletothenegativebatterypost(
Figure1).
G010257
1
2
3
5
4
Figure1
1.Bolt4.Negativebatterypost
2.Washer5.Nut
3.Negativebatterycable
2
SettingUptheMotionControlLeversandtheSeat
NoPartsRequired
Procedure
1.Locatethemotioncontrolleversattachedbutfoldeddownonthemachine.
2.Removetheupperbolt(3/8x1inch)andwasher;loosenthelowerbolt(3/8x1inch).Raisethemotioncontrol
leverstotheuprightposition.
3.Aligntheholesinthemotioncontrolleverwiththeholesinthecontrolarmshaftandinstalltheboltandwasher
removedpreviously.Handtightenallfasteners.Repeatthisforbothcontrolslevers.
4.Setuptheseatasfollows(
Figure2):
2