Toro TITAN - Throttle Control Assembly Replacement

ThrottleControlAssemblyReplacement
ThrottleControlAssemblyRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Removethecontrolpanelassemblyfromtherightconsole.
g322343
Figure41
4.Prythekeepertabonthethrottlecontrolassemblyandunsnapthecontrol
fromtheconsole.
5.Loosentheclampsecuringthethrottlecabletothethrottleplate(Figure28).
g321451
Figure42
6.Removethethrottlecablefromthethrottleplate,notingthepositionofthe
cableintheplate.
7.Pullthethrottlecableassemblythroughtheconsoleandoutofthemachine.
Chassis:ServiceandRepairs
Page5–20
TitanServiceManual
3438-774RevA