Toro Workman HD Series - Page 122

Workman HD SeriesPage 6 − 52Drive Train
29.Install differential gear assembly together with fork
shaft onto transaxle case.
Figure 102
1
2
1. Differential gear assy. 2. Fork shaft
Figure 103
30.Install side cover:
A. Insert dowel pins onto transaxle case.
B. Apply silicone sealant onto mating surface of side
cover.
C. Install side cover and secure with ten (10) flange
head screws. Torque screws from 18.5 to 22 ft−lb
(24.5 to 29.5 N−m).
Figure 104
18.5 to 22 ft−lb
(24.5 to 29.5 N−m)
Drive Train