How to fix a Toro XLS 380 that is cutting unevenly?
If your Toro Lawn Mower is cutting unevenly, start by setting the tire pressure correctly. Then, level the mower from side-to-side and front-to-rear. Finally, clean the underside of the mower to remove any accumulated debris.
What to do if Toro Lawn Mower starter does not crank?
If the starter on your Toro Lawn Mower does not crank, there are several things you can check. First, ensure that the blade control (PTO) is disengaged and the transmission drive control is in the Operate position. Verify that the battery is not dead and charge it if necessary. Inspect the electrical connections for corrosion or looseness, ensuring they have good contact. Check the fuse and replace it if it's blown. For damaged relays or switches, contact an Authorized Service Dealer.
General| Brand | Toro |
|---|---|
| Model | XLS 380 |
| Category | Lawn Mower |
| Language | English |
Read and understand the contents of this manual before operating the tractor.
Use recommended unleaded gasoline and check oil level before each use.
Engages and disengages power to the electric clutch.
Steps to start the engine safely.
Steps to safely stop the engine.
Procedure to safely stop the machine.
Lists maintenance procedures and intervals for optimal machine performance.
Procedures for servicing the engine oil, air cleaner, and spark plug.
Servicing the blades, including inspection, removal, and sharpening.
To Next Page
