Toro Z Master 74958 - Stopping the Machine; Adjusting the Height-Of-Cut

StoppingtheMachine
Tostopthemachine,movethemotion-controllevers
toneutralandthentotheNEUTRAL-LOCKposition,
disengagetheblade-controlswitch(PTO),andturn
theignitionkeytotheOFFposition.
Settheparkingbrakewhenyouleavethemachine;
refertoSettingtheParkingBrake(page19).Remove
thekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandsetthe
parkingbrakewhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeight-of-Cut
UsingtheTransportLock
Thetransportlockhas2positions,andisusedwith
thedeck-liftpedal.ThereisaLOCKpositionand
anUNLOCKpositionforthetransportpositionofthe
mowerdeck(Figure24).
25