Toro Z Master 74958 - Adjusting Motion-Control Linkage; Motion-Control Linkage Adjustment

g009195
Figure79
5.Iftheendsofthelevershitagainsteach
other,refertoAdjustingtheMotion-Control
Neutral-LockPivot(page61).
Adjustingthe
Motion-ControlLinkage
Thepump-controllinkagesarelocatedoneither
sideofthefueltank,belowtheseat.Rotatethe
pumplinkagewitha1/2inchwrenchforne-tuning
adjustmentssothatthemachinedoesnotmovein
neutral.Makeanyadjustmentsforneutralpositioning
only.
WARNING
Theenginemustberunningandthedrive
wheelsmustbeturning,sothemotion-control
adjustmentcanbeperformed.Contactwith
movingpartsorhotsurfacesmaycause
personalinjury.
Keepyourngers,hands,andclothingclear
ofrotatingcomponentsandhotsurfaces.
1.Priortostartingtheengine,pushthedeck-lift
pedal,removetheheight-of-cutpin,andlower
thedecktotheground.
2.Raisetherearofmachineandsupportitwith
jackstands(orequivalentsupport)justhigh
enoughtoallowthedrivewheelstoturnfreely.
3.Removetheelectricalconnectionfromtheseat
safetyswitch,locatedunderthebottomcushion
oftheseat.
Note:Theswitchisapartoftheseatassembly.
4.Temporarilyinstallajumperwireacrossthe
terminalsintheconnectorofthemainwiring
harness.
59