Toro Z Master 8000 Series - Safety Switch Adjustment; Servicing the Fuses

g000960
Figure48
1.Positive(+)batterypost3.Red(+)chargerlead
2.Negative(–)batterypost4.Black(–)chargerlead
InstallingtheBattery
1.Positionthebatteryinthetraywiththeterminal
postsoppositefromthehydraulictank(Figure
47).
2.Installthepositive(red)batterycabletothe
positive(+)batteryterminal.
3.Installthenegative(black)batterycableand
groundwiretothenegative(-)batteryterminal.
4.Securethecableswith2bolts,2washers,and
2locknuts(Figure47).
5.Slidetheredterminalbootontothepositive
(red)batterypost.
6.Installtheclampandsecureitwiththewingnuts
andJ-hooks(Figure47).
AdjustingtheSafety
Switches
Adjustallsafetyswitchessothattheplungerextends
4.8mmto6.4mm(3/16inchto1/4inch)fromthe
switchbodywhentheplungeriscompressed(Figure
49).
g006849
Figure49
1.4.8to6.4mm(3/16to1/4inch)
ServicingtheFuses
Theelectricalsystemisprotectedbyfuses.Itrequires
nomaintenance;however,ifafuseblowscheckthe
component/circuitforamalfunctionorshort.
1.Thefusesarelocatedonrightsidebehindthe
seat.
2.Toreplacethefuses,pulloutonthefuseto
removeit.
3.Installanewfuse.
42