32
CONTROLS AND FEATURES
English
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
a In the Sound menu, press B or b to select Dolby
Volume.
b Press C or c to select Low, High or Off.
NOTE:
•The Dolby Volume setting influences the Dynamic Range
Control and Digital Audio Output settings.
•If Dynamic Range Control is set to On, this feature will be
disabled.
This feature allows control of audio compression for some digital
TV programmes (MPEG-1 and MPEG-2 audio programmes are
not supported).
a In the Sound menu, press B or b to select Dynamic
Range Control.
b Press C or c to select On or Off.
NOTE: This feature is disabled when Dolby Volume is set to
Low or High.
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an
external input. Using the Audio Level Offset feature reduces
these volume differences.
a Set the volume level usually used when watching a
DTV 5.1ch programme.
b Tune to a channel which is DTV 2ch, ATV or an
external input.
c In the Sound menu, press B or b to select Audio
Level Offset and press OK.
d Press B or b to select an option, and then use C or c
to adjust the volume level.
NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only DTV 2ch is available and the other two items are
greyed out in the menu. This allows you to easily adjust
according to each condition.
• When watching a DTV 5.1ch programme, this feature is not
available.
This setting is used to set the sound output when headphones are
connected.
a In the Sound menu, press B or b to select
Headphone Settings and press OK.
b Press B or b to select Speaker Link and use C or c
to select On or Off.
c If you select Off, then highlight Headphone Level
and use
C or c to adjust the headphone sound.
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.
a In the Sound menu, select Audio Description and
press OK.
b Press B or b to select Audio Description, and then
press
C or c to select On.
The AD button on the Remote can also be used to
toggle the Audio Description feature between On
and Off.
c To adjust the level of the audio description sound to
the main sound, highlight Mixing Level and use
C or
c.
Dolby Volume®
Dynamic Range Control
Audio Level Offset
To Next Page
Loading...
Need help?
General
