Toshiba 42VL863B - Base Colour Adjustment; Colour Temperature; Auto Brightness Sensor Settings; LED Backlight Control

36
CONTROLS AND FEATURES
English
The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a In the Advanced Picture Settings menu, press B or
b to select Base Colour Adjustment and press OK.
b Press B or b to select an option, and then press c to
move to the adjustment window.
c Press C or c to select Hue, Saturation or Brightness,
and then press
B or b to adjust the settings as
required.
d Press BACK to return to the previous menu.
To return to the factory settings, select Reset and
press OK.
Colour Temperature increases the ‘warmth’ or ‘coolness’ of the
picture by increasing the red or blue tint.
a In the Advanced Picture Settings menu, press B or
b to select Colour Temperature and press OK.
b Press C or c to adjust the level.
The adjustment range is 0 (warm) to 10 (cool).
NOTE: If Picture Mode is set to AutoView, the adjustment
range is -5 to +5.
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a In the Advanced Picture Settings menu, press B or
b to select Auto Brightness Sensor Settings and
press OK.
b Press C or c to select On and press OK.
c Press B or b to select Backlight Adjustment Pro
and press OK.
d The Backlight Adjustment Pro window will appear.
Press OK again to display the adjustment window.
e Press C or c to select a point and press B or b to
adjust the level.
f Press OK to fix the adjustment.
To cancel the adjustment when selecting a point,
select Cancel and press OK.
To return the adjustments of all points to the factory
defaults, select Reset and press OK.
You can adjust the backlighting of the black areas of the image
and enhance the contrast.
a In the Advanced Picture Settings menu, press B or
b to select LED Backlight Control.
b Press C or c to select Low, Middle, High, Auto or Off.
NOTE: When Picture Mode is set to any mode other than
Auto View, Auto is greyed out.
Base Colour Adjustment
Colour Temperature
Hue
Saturation
Reset
Brightness
0Red
Green
Blue
Yellow
Magenta
Cyan
00
000
000
000
000
000
Base Colour Adjustment
Hue Saturation Brightness
0Red 0 -1
Auto Brightness Sensor Settings
LED Backlight Control
Auto Brightness Sensor Settings
Backlight Adjustment Pro
Auto Brightness Sensor
On
100
0
Backlight Adjustment Pro
Backlight Control Level
Control
Level
Ambient Light
48
Cancel
Reset