73
CONTROLS AND FEATURES
English
These input labels are shown in the input selector. You can label
video inputs according to the devices you have connected to the
TV.
a Press MENU / Cc / B / Cc to highlight Setup/
Preferences icons and press OK.
b Press B or b to select AV Connection and press OK.
c Press B or b to select Input Labeling and press OK.
d Press B or b to highlight the item you want to label,
and then press
C or c to select --, Amplifier, Cable,
DVD, Game, PC, Recorder, Satellite or VCR, or press
the GREEN button to select User Input.
NOTE: When User Input is selected by pressing the
GREEN button, the Software Keyboard window will
appear. Input the desired characters (10 characters or
less) by using the Software Keyboard (see page 47)
or using the number buttons for a number input. To
save your settings, press the BLUE button.
e Repeat step 4 for other video inputs.
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the ‘Connecting
a computer’ section), and then use the PC/HDMI 3 Audio
setting.
a In the Preferences menu, press B or b to select AV
Connection and press OK.
b Press B or b to highlight PC/HDMI 3 Audio, and
then press
C or c to select the PC option.
NOTE: Selecting the PC option will force HDMI 3
Audio to Digital mode.
The AUDIO terminals for the COMPONENT VIDEO INPUT (EXT 2)
and VIDEO INPUT (EXT 3) are shared.
Select an appropriate option (EXT 2 or EXT 3) for the input that
you are using.
a In the Preferences menu, press B or b to select AV
Connection and press OK.
b Press B or b to highlight Side Shared Audio, and
then press
C or c to select EXT 2 or EXT 3.
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 3 (AUDIO) on the back of
the television (as shown in the ‘Connecting an HDMI® or DVI
device to the HDMI input’ section), then use the HDMI 3 Audio
setting.
a In the Preferences menu, press B or b to select AV
Connection and press OK.
b Press B or b to select HDMI 3 Audio, and then press
C or c to select Auto or Analogue.
If the sound is absent, try selecting a different setting.
NOTE: HDMI 3 supports digital and analogue sound,
HDMI 1, HDMI 2 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
Labeling video input sources
To Next Page
Loading...
