41
CONTROLS AND FEATURES
English
This feature is used to hold a still image on the screen.
a Press r to hold an image on the screen, and press
r again to cancel.
When the HDMI Information Display feature is On and you are
watching an HDMI input source, pressing the button
displays the HDMI signal information banner.
a In the Preferences menu, press B or b to select
HDMI Information Display.
b Press C or c to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate*, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and Content
Type (if available).
* If the HDMI input source is interlaced, “Field Rate”
will be displayed instead of “Frame Rate”.
Picture still
HDMI Information Display
To Next Page
Loading...
