62
CONTROLS AND FEATURES
English
Other features
Panel Lock disables the buttons on the television. All buttons on
the remote control can still be used.
a Press MENU / Cc / B / Cc to highlight Setup/
Preferences icons and press OK.
When Panel Lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby button
is pressed, the television will switch off and can only be
brought out of standby by using the remote control.
The timers
This feature will set the television to go to a specific channel at a
certain time. It can be used to view a particular programme, or by
setting the mode to daily or weekly, can be used to view a series
of programmes.
a Press MENU / Cc / B / Cc to highlight TV
Programmes/Programme Timers icons and press
OK.
b Press b to select Programme Timers, and then press
OK.
c Press b if necessary to select an open timer position,
then press OK. The Set Timer menu will now appear
on screen.
d Press B and b to go through the list adding the
details of the programme by using the number
buttons and
C and c to make selections.
e When all of the details have been entered, highlight
Set Timer and press OK to save the timer.
The ORANGE/RED programme timer indicator on the
front of the television will be lit (see page 83 for details).
PLEASE NOTE: When a timed programme is about to start, an
information screen will appear offering the option of
watching or cancelling the programme. The menus and other
channels will not be available during the timed programme
unless the programme timer is cancelled.
It will only be possible to create or edit programme timers for
the currently tuned DTV input.
Panel Lock
To Next Page
Loading...
