61
CONTROLS AND FEATURES
English
c Press B b C c to select the photo you want to copy
from the USB storage device or DLNA CERTIFIED™
server to the TV’s flash memory, and then press OK.
Photo Edit
a Press B or b to select Photo Edit and press OK.
b Press B or b to select Rotate or Delete.
c Set the following items as required.
• Rotate — Press OK to rotate the image
90°clockwise.
• Delete — Press OK. A confirmation window will
appear. Press
C or c to select YES, and then press
OK.
d Press BACK.
Settings
a Press B or b to select Settings, and then press OK.
b Press B or b to select Clock, Position or Auto Power
Off.
c Set the following items as required.
• Clock — Press
C or c to select Off, Digital Clock,
Analogue Clock or Analogue + Digital.
• Position — Press
C or c to select Left or Right.
• Auto Power Off — Press
C or c to select Off,
00:30, 01:00, 02:00, 04:00, 06:00 or 12:00.
If the Photo Frame window is left open, the TV will
automatically turn off after the set length of time
(maximum 12 hours).
d Press BACK.
e Select Start and press OK.
NOTE:
• The clock display will only appear when time from a digital
broadcast is available.
• The photo and clock displays are moved by 4 dots every 5
minutes to minimize the risk of screen burn-in.
• The pre-installed photo file is stored in the TV’s flash
memory before shipment.
• Picture Size selection (Normal/ Dot by Dot) is available by
pressing the QUICK button. However when the resolution is
1920 x 1080 or above, the Picture Size selection menu will
be grayed out.
To Next Page
Loading...
