Toshiba 50L9450 Series - Page 26

26
Using the TV’s features
Using the Fine Texture Restoration
This feature allows you to adjust the  ne texture of
the picture.
1 From the Picture Settings menu, press  or 
to select Advanced Picture Settings, and then
press OK.
2 Press  or  to select Fine Texture
Restoration, and then press OK.
3 Press  or  to select Fine Texture
Restoration.
4 Press  or  to select Auto or Manual.
If you select Manual
1 Press  or  to select Level.
2 Press  or  to set the picture texture level
(from 0 to 10).
NOTE:
This feature should normally be set to Auto.
Using the Resolution +
The Resolution+ feature allows you to adjust the
clarity levels for your desired picture settings.
1 From the Advanced Picture Settings menu,
press  or  to select Resolution+, and then
press OK.
2 Press  or  to select Resolution+.
3 Press  or  to select Auto or O .
4 Press  or  to select Gain.
5 Press  or  to adjust the level of the e ect
(from 0 to 10).
• The higher the number, the better the clarity.
Using the 3D Flame Resolution+
This feature allows you to reduce  ickering and
noise.
1 From the Advanced Picture Settings menu,
press  or  to select 3D Flame Resolution+.
2 Press  or  to select Auto, On or O .
Using the Colour Texture Restoration
This feature restores picture brilliance and texture
to deep colours in the picture such as colourful
 owers, fruit, etc.
1 From the Advanced Picture Settings menu,
press  or  to select Colour Texture
Restoration.
2 Press  or  to select On or O .
Using the Mosquito Noise Reduction
This feature reduces the amount of mosquito noise
that appears near outlines.
1 From the Advanced Picture Settings menu,
press  or  to select Mosquito Noise
Reduction.
2 Press  or  to select Auto, High, Middle,
Low, or O .
Using the High Dynamic Range Restoration
This feature restores the range of brightness and
increases the range of expression.
1 From the Advanced Picture Settings menu,
press  or  to select High Dynamic Range
Restoration.
2 Press  or  to select On or O .
Using the Brilliance Restoration
This feature allows you to adjust the picture
brilliance.
1 From the Advanced Picture Settings menu,
press  or  to select Brilliance Restoration,
and then press OK.
2 Press  or  to select Brilliance Restoration.
3 Press  or  to select Auto or Manual.
If you select Manual
1 Press  or  to select Level.
2 Press  or  to set the level (from 0 to 10).
Using the Colour Space Setting
This setting speci es the method by which bright
colours are reproduced.
1 From the Advanced Picture Settings menu,
press  or  to select Colour Space Setting.
2 Press  or  to select one of the following
settings.
Auto : Changes the setting automatically
according to the type of picture.
x.v.Colour : This is the ideal setting for viewing
x.v.Color compatible pictures.
Colour Space Restoration : Reproduces
colours brightly.
Standard : Displays the picture using the
standard colours.
506584L9450SeriesEn.indd26506584L9450SeriesEn.indd26 2014/08/2114:23:462014/08/2114:23:46