Toshiba B-FV4T-GS14-QM-R User Manual

3PrinterOperationsToshibaB‐FV4TOwner’ sManual
27
3.2.2 DumpMode
The printer will enter the Dump mode after running a self test. In this mode,
charactersareprintedinhexadecimalcodes,allowingusersandengineerstodebug
thesystem.
Toreturntotheonlinemode:
 Turnofftheprinter,andturnitonagain.
3.3RestoreYourPrintertoFactorySettings
Someproblemscanbesolvedbyrestoringtheprintertoitsfactorysettings.Dothe
followingtoresetyourprinter.
1. Turnofftheprinter.
2. PressandholdtheFEEDbutton,andturnontheprinter.
3. Bothstatuslightswilllightupsolidorangeforafewseconds.Next,theyturnto
greenshortly,andthenturntoothercolors.Whenbothlightsturntored,release
theFEEDbuttonimmediately.
4. Press and holdthe FEED button for 3 seconds and release it. Both status lights
willblinkredthreetimes,andturntosolidorangeforafewseconds.Afterthat,
LED2goesoutwhileLED1turnstosolidgreen.


NoteInstep4,ifyoudonotholdtheFEEDbuttonlongenough,LED2 
willblinkorangethreetimeswhileLED1goesout.Itmeanstheprinter
isnotreset.


Toshiba B-FV4T-GS14-QM-R Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Operating System Compatibility	Windows, Linux
Ribbon Length	300 m
Maximum Print Width	108 mm
Media Type	Labels, Tag
Connectivity	USB, Serial
Media Width	25.4 mm to 110 mm
Media Thickness	0.06 mm to 0.2 mm
Ribbon Width	110 mm