5๎๎Troubleshooting๎๎Toshiba๎BโFV4T๎Ownerโ s๎Manual๎
36๎
๏ก The๎ media๎ is๎ not๎ loaded๎ correctly.๎See๎ Section๎ 2.3,๎โLoading๎ Mediaโ๎ to๎ reload๎
the๎media.๎
๏ก The๎ media๎ sensor๎ needs๎ to๎ be๎ calibrated.๎ See๎ Section๎ 3.1,๎ โMedia๎ Sensor๎
Calibrationโ๎to๎calibrate๎the๎sensor.๎
๏ก The๎media๎sensor๎is๎dirty.๎Clean๎the๎media๎sensor.๎
Nothing๎is๎printed๎
๏ก The๎ media๎ is๎ not๎ loaded๎ correctly.๎See๎ Section๎ 2.3,๎โLoading๎ Mediaโ๎ to๎ reload๎
the๎media.๎
๏ก The๎ribbon๎is๎not๎loaded๎correctly.๎See ๎Section๎2.4,๎โLoading๎Ribbonโ๎to๎reload๎
the๎ribbon.๎
๏ก The๎ print๎ data๎ might๎ not๎ be๎ sent๎ successfully.๎ Make๎ sure๎ the๎ interface๎ is๎ set๎
correctly๎in๎the๎printer๎driver,๎and๎send๎the๎print๎data๎again.๎
The๎print๎quality๎is๎poor๎
๏ก The๎printhead๎is๎dirty.๎Clean๎the๎printhead.๎
๏ก The๎platen๎roller๎is๎dirty.๎Clean๎the๎platen๎roller.๎
๏ก Adjust๎the๎print๎darkness,๎or๎lower๎the๎print๎speed.๎
๏ก The๎media๎is๎incompatible๎for๎the๎ribbon.๎Use๎the๎compatible๎media๎instead.๎
๏ก The๎ media๎ is๎ incompatible๎ for๎ the๎ printer.๎ Use๎ Tos hibaโapproved๎ media๎ roll๎
instead.๎
5.3๎๎Ribbon๎Problems๎
The๎ri bbon๎is๎out๎
๏ก Load๎a๎new๎ribbon๎roll.๎
The๎ri bbon๎is๎broken๎
๏ก Check๎ the๎ print๎ darkness๎ and๎ adjust๎ it๎ if๎ it๎ is๎ too๎ high,๎ and๎ take๎ the๎ following๎
steps๎to๎fix๎the๎broken๎ribbon:๎
To Next Page
Loading...
