EasyManua.ls Logo

Toshiba B-EX4 SERIES Service Manual

Toshiba B-EX4 SERIES
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PRINTED IN JAPAN
TOSHIBA Barcode Printer
B-EX4 SERIES
Document No. EO18-33027G
Original Mar., 2011
(Revised Feb., 2020)
Maintenance Manual

Table of Contents

Other manuals for Toshiba B-EX4 SERIES

Question and Answer IconNeed help?

Do you have a question about the Toshiba B-EX4 SERIES and is the answer not in the manual?

Toshiba B-EX4 SERIES Specifications

General IconGeneral
Print TechnologyThermal Transfer / Direct Thermal
Power SupplyAC 100-240V, 50/60 Hz
Print Resolution203 dpi
Max Print Width104 mm
ConnectivityUSB, Serial, Ethernet
Media SensorTransmissive, Reflective
Media TypeRoll, Fanfold, Tag, Ticket
Media Width25.4 mm
Ribbon Width110 mm
Ribbon LengthUp to 600 m
Media Thickness0.06 – 0.19 mm

Summary

1. Unpacking Procedures

1.1 Procedures

Step-by-step instructions for opening the carton and unpacking the printer and accessories.

4. Installation Procedure for Optional Equipment

4.1 Disc Cutter (B-EX204-QM-R) Installation

Step-by-step guide for installing the disc cutter option kit on the printer.

4.2 Rotary Cutter (B-EX204-R-QM-R) Installation

Instructions for installing the rotary cutter optional equipment onto the printer.

4.3 Peel Off Module (B-EX904-H-QM-R) Installation

Procedure for installing the peel-off module to the printer for label dispensing.

4.4 Ribbon Saving Module (B-EX904-R-QM-R) Installation

Guide for installing the ribbon saving module to optimize ribbon usage.

4.7 Wireless LAN Board Installation

Instructions for installing the wireless LAN board for network connectivity.

4.10 UHF RFID Kit Installation

Guide for installing the UHF RFID kit, including safety precautions.

4.11 HF RFID Module Mount Kit Installation

Instructions for installing the HF RFID module mount kit, including safety precautions.

5. System Mode Overview

5.4 Parameter Settings

Covers setting various printer parameters like communication, LCD, and password.

5.5 Adjust Set Options

Instructions for fine-tuning printer parameters such as feed, cut, tone, and ribbon adjustments.

5.9 Interface Settings

Configuration options for printer interfaces including network, USB, RS-232C, and Centronics.

5.11 RFID Module Setting

Configuration of parameters specific to the RFID module, including test and setting options.

6. On Line Mode Functions

6.6 Manual Threshold Setting

Guide to manually setting sensor thresholds for media gap and black mark detection.

6.7 RFID Calibration Process

Procedure for calibrating the RFID module for optimal read/write performance.

7. Periodic Maintenance Procedure

8. Troubleshooting Guide

9. Major Unit Replacement Procedures

9.1 Power Supply Unit Replacement

Step-by-step instructions for replacing the printer's power supply unit.

9.7 Print Head Replacement

Detailed instructions and safety precautions for replacing the printer's print head.

10. RFID Analyze Tool Setup and Operation

10.4 Operating Procedure with RFID Analyze Tool

Step-by-step guide on how to connect the printer and use the RFID Analyze Tool application.

11. Print Head Position Adjustment

11.2 Print Head Position Adjustment Procedure

Provides detailed steps and warnings for adjusting the print head position for optimal printing.

Related product manuals