6. ON LINE MODE EO18-33027
6. 10 Saving Log/Receive Buffer Data
6-24
6.10 Saving Log/Receive Buffer Data
6.10.1 Outline of Log Data Save
When the [ENTER] key is held down for 3 seconds while the printer is in online or pause, the printer
automatically save the print log and restart.
6.10.2 Conditions
6.10.2.1 Model
B-EX4T Type1 JP model with firmware V1.0I only
6.10.2.2 Option
• The RFID module must not installed.
• The expansion I/O board must be installed.
• A USB memory must be fitted.
6.10.2.3 Mode
To save the print log, the printer must be in the online or pause state.
6.10.3 Data to be Saved
6.10.3.1 Data type
Data to be saved is print logs and receive buffer data. Both are the same with those described in Section 9.10
LOG and 9.9 Dump Mode.
6.10.3.2 The number of files to be saved
Up to 10 files can be saved each.
When the number of files exceed 10, the latest file will be erased.
6.10.3.3 Storage location and file name
Unlike those described in Section 9.10 LOG and 9.9 Dump Mode, the files are saved in “/ATA0/LOGDATA/”
direction under the following name:
Log file: LOG00001.TXT to LOG00010.TXT
Receive buffer data: LOG00001.BIN to LOG00010.BIN
6.10.4 Time Required
It takes about 9 seconds for the printer to restore to the online state after it starts saving.
To Next Page
Loading...
