Toshiba B-EX4 SERIES - 5.4 Parameter Settings

5. SYSTEM MODE EO18-33027
5.4 PARAMETER SET
5-30
5.4 PARAMETER SET
 Outline of Parameter Setting
In the Parameter Setting mode, various kinds of parameters, such as communication, key, LCD, etc. can be set.
This will allow the use of the printer to comply with your operating conditions.
The Parameter Setting menu contains the following:
MENU ITEM
SYSTEM MODE
<2>PARAMETER SET
PRINTER SET
SOFTWARE SET
PANEL
PASSWORD
5.4.1 PRINTER SET
Contents of PRINTER SET submenu.
MENU ITEM
SYSTEM MODE
<2>PARAMETER SET
PRINTER SET
MEDIA LOAD
FORWARD WAIT
FORWARD WAIT POS.
FW/BK ACT.
HU CUT/RWD.
RBN SAVE
PRE PEEL OFF
BACK SPEED
TYPE OF RIBBON
NOTE: This parameter is available only to the B-
EX4T2, B-EX6T2 and B-EX4D2.
* This parameter is not used for the B-EX4D2.