Toshiba B-EX4 SERIES Service Manual

EO18-33027
TABLE OF CONTENTS
Page
1. UNPACKING ------------------------------------------------------------------------------------------------------ 1- 1
1.1 PROCEDURES -------------------------------------------------------------------------------------------------- 1- 1
1.2 CHECKS ----------------------------------------------------------------------------------------------------------- 1- 3
2. PRINTER INSTALLATION ------------------------------------------------------------------------------------- 1- 3
3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION
/MAJOR UNIT REPLACEMENT/MAINTENANCE --------------------------------------------------- 3- 1
3.1 OPENING/CLOSING THE TOP COVER ------------------------------------------------------------------ 3- 3
3.2 REMOVING THE SIDE PANEL (L) ------------------------------------------------------------------------- 3- 3
3.3 OPENING/CLOSING THE PRINTER BLOCK ----------------------------------------------------------- 3- 3
3.4 REMOVING THE OPERATION PANEL ------------------------------------------------------------------- 3- 5
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT ------------------------------------- 4- 1
4.1 DISC CUTTER (B-EX204-QM-R) --------------------------------------------------------------------------- 4- 2
4.2 ROTARY CUTTER (B-EX204-R-QM-R) ------------------------------------------------------------------- 4- 9
4.3 PEEL OFF MODULE (B-EX904-H-QM-R) ---------------------------------------------------------------- 4-15
4.4 RIBBON SAVING MODULE (B-EX904-R-QM-R) ------------------------------------------------------- 4-27
4.5 RTC/USB HOST INTERFACE BOARD (B-EX700-RTC-QM-R) ------------------------------------ 4-33
4.6 EXPANSION I/O INTERFACE BOARD (B-EX700-IO-QM-R) --------------------------------------- 4-36
4.7 WIRELESS LAN BOARD (B-EX700-WLAN-QM-R) ---------------------------------------------------- 4-39
4.8 PARALLEL INTERFACE BOARD (B-EX700-CEN-QM-R) ------------------------------------------- 4-43
4.9 SERIAL INTERFACE BOARD (B-EX700-RS-QM-R) -------------------------------------------------- 4-45
4.10 UHF RFID Kit (B-EX700-RFID-U4-US/EU/CN-R) ------------------------------------------------------ 4-47
4.11 HF RF
ID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R) ---------------------------------------- 4-71

Toshiba B-EX4 SERIES Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi
Max Print Width	104 mm
Connectivity	USB, Serial, Ethernet
Media Sensor	Transmissive, Reflective
Media Type	Roll, Fanfold, Tag, Ticket
Media Width	25.4 mm
Ribbon Width	110 mm
Ribbon Length	Up to 600 m
Media Thickness	0.06 – 0.19 mm