6. ON LINE MODE EO18-33027
6. 4 ONLINE MODE LCD DISPLAY
6-4
6.4 ONLINE MODE LCD DISPLAY
6.4.1 Online Mode LCD Display Example
Printer
LCD Display Display contents
Online
← Model name, Firmware version (*5)
← Message
← The number of labels printed (*1)
← IP address etc. (*4)
← Icon
Pause
← The number of remaining labels to print (*2)
← Message
← 1
st
line of the error message
← 2
nd
line of the error message (*6)
← Icon
Head open
← The number of remaining labels to print (*2)
← Message
← 1
st
line of the error message
← 2
nd
line of the error message
← Icon, Help guide (*3)
* Whether to display or hide the 1
st
, 3
rd
and 4
th
lines of online mode display can be selected in the system
mode.
* Refer to “Icon display” for Icon in detail.
(*1) The number of labels printed is the cumulative number of labels printed while the printer is activated.
It is reset to zero when the printer is turned on. During an issue with the cut interval specified, the
number of labels is updated when the label is cut normally.
(*2) [The number of remaining labels to print] = [Specified number of labels to print] – [The number of
normally printed labels before occurrence of an error or placing the printer in pause]
When the number of remaining labels to print is zero, it is not displayed. During an issue with the cut
interval specified, the number of remaining labels is updated when the label is cut normally.
(*3) The help guide is displayed only when applicable help message exists.
(*4) The message displayed in this area is IP address or supplemental information like ribbon near end.
• When LAN/WLAN setting is disabled, the IP address is not displayed even if displaying IP address
is enabled in the system mode.
• The ribbon near end message is displayed when a ribbon near end is detected, regardless of
To Next Page
Loading...
