Toshiba B-EX4 SERIES Service Manual

6. ON LINE MODE EO18-33027
6. 9 JOB CANCELLATION
6-23
6.9 JOB CANCELLATION
6.9.1 Outline of the Job Cancellation
The [CANCEL] key enables cancellation of subsequent print jobs.
Holding down the [CANCEL] key for 3 seconds while the printer is in an error* or pause state causes
the printer to start a quick reset and shift to the online mode.
As long as the [CANCEL] key is held down, the data in the receive buffer is all discarded.
Job cancellation is finished when the [CANCEL] key is released, and the printer restores to the normal
condition.
*: Errors which can be recovered by a depression of the [RESTART] key.
For details, refer to Section 6.8 LCD MESSAGES AND LED INDICATIONS.
*: A command error may occur if the [CANCEL] key is released before the all received data has been
discarded.
6.9.2 Job Cancellation Operation Example
[Online mode]
1. Normal condition
↓ Occurrence of an error of depression of the
[PAUSE] key.
[Online mode]
2. Pause or error condition
↓ Hold down [PAUSE] key for 3 seconds.
[Online mode]
3. Job cancellation after
quick reset
As long as the [CANCEL]
key is held down, received
data is discarded.
↓ Release the [CANCEL] key.
[Online mode]
4. Normal condition
The printer restores to the
online mode.

Toshiba B-EX4 SERIES Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi
Max Print Width	104 mm
Connectivity	USB, Serial, Ethernet
Media Sensor	Transmissive, Reflective
Media Type	Roll, Fanfold, Tag, Ticket
Media Width	25.4 mm
Ribbon Width	110 mm
Ribbon Length	Up to 600 m
Media Thickness	0.06 – 0.19 mm