Toshiba B-EX4 SERIES - Information Mode Print Sample

6. ON LINE MODE EO18-33027
6. 8 INFORMATION MODE
6-21
(3) Before shifting to the Information mode, make sure that the printer has not received any commands
related to feed or drawing. If the printer has received such commands, printing will not be
performed and the printer will return to the normal state. At this time, a quick reset will not be
performed.
(4) Do not send a command to the printer in the information mode.
6.8.3 Information Mode Print Sample
<Print sample 1>
B-EX4T1: Max. number of digits: 25 mm, Center-aligned
<Applicable model> B-EX4T1-G/T-QM/CN C1.1A
B-EX4T2: Max. number of digits: 25 mm, Left-aligned
<Applicable model> B-EX4T2-G/T-QM/CN C1.1
<Print data 1>
Item
Information
Range
1st line
Feed amount in the information mode (Unit: cm)
0 to 320000000
2nd line
Feed amount in the information mode (Unit: inch)
0 to 125984251.9
<Print sample 2>
B-EX4T1: Max. number of digits: 74 mm, Center-aligned
<Applicable model> B-EX4T1-G/T-QM/CN C1.3 or later
320000000cm
125984251.9”
//
//
Max. number of digits: 25 mm
//
//
Effective print width
320000000cm
125984251.9”
Max. number of digits: 25 mm
Effective print width
TOTAL COUNTER LIST
MM-dd-yyyy hh:mm
xxxxxxxxxxxxxxxx
S/N:zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
PRINTER aaaaaaaaacm
bbbbbbbbb.binch
//
//
Max. number of digits: 74 mm
//
//
Effective print width