Toshiba B-EX4 SERIES Service Manual

EO18-33027
5. SYSTEM MODE -------------------------------------------------------------------------------------------------- 5- 1
5.1 OPERATION PANEL ------------------------------------------------------------------------------------------- 5- 1
5.2 OVERVIEW ------------------------------------------------------------------------------------------------------- 5- 2
5.3 SELF-DIAGNOSTIC TEST ------------------------------------------------------------------------------------ 5- 3
5.3.1 Counter, Parameter / MAINTENACE CONT --------------------------------------------------------- 5- 3
5.3.1.1 Menu operation procedure example ------------------------------------------------------------ 5- 4
5.3.1.2 COUNETR PARAMETER PRINT CONTENTS ---------------------------------------------- 5- 5
5.3.2 Auto Diagnostic / AUTO DIAGNOTICS ------------------------------------------------------------- 5-20
5.3.2.1 AUTO SELF DIAGNOSIS PRINTOUT -------------------------------------------------------- 5-21
5.3.3 Print Head Element Check / HEAD CHECK -------------------------------------------------------- 5-29
5.4 PARAMETER SETTING --------------------------------------------------------------------------------------- 5-30
5.4.1 Printer setting / PRINTER SET ------------------------------------------------------------------------ 5-31
5.4.1.1 Media loading / MEDIA LOAD ------------------------------------------------------------------- 5-31
5.4.1.2 Setting for forward feed standby / FORWARD WAIT -------------------------------------- 5-31
5.4.1.3 Forward feed standby position / FORWARD WAIT POS. ------------------------------- 5-31
5.4.1.4 Standby action / FW/BK ACT. ------------------------------------------------------------------ 5-32
5.4.1.5 HU CUT/RWD --------------------------------------------------------------------------------------- 5-33
5.4.1.6 Ribbon save / RBN SAVE ------------------------------------------------------------------------ 5-33
5.4.1.7 Pre peel-off / PRE PEEL OFF ------------------------------------------------------------------- 5-33
5.4.1.8 Back feed / BACK SPEED ----------------------------------------------------------------------- 5-34
5.4.1.9 Ribbon wound / BA TYPE OF RIBBON ------------------------------------------------------- 5-34
5.4.2 Soft control setting / SOFTWARE SET ----------------------------------------------------------------- 5-35
5.4.2.1 Character code / FONT CODE ------------------------------------------------------------------ 5-36
5.4.2.
2 Font “0” type / ZERO FONT ---------------------------------------------------------------------- 5-36
5.4.2.3 Control code / CODE ------------------------------------------------------------------------------ 5-36
5.4.2.4 Manual selection / MANUAL --------------------------------------------------------------------- 5-37
5.4.2.5 Peel-off wait status / PEEL OFF STATUS ---------------------------------------------------- 5-37
5.4.2.6 USB STATUS / USB I/F STATUS -------------------------------------------------------------- 5-37
5.4.2.7 FEED Key Function -------------------------------------------------------------------------------- 5-37
5.4.2.8 Kanji special code / KANJI CODE -------------------------------------------------------------- 5-38
5.4.2.9 Euro code / EURO CODE ------------------------------------------------------------------------ 5-38
5.4.2.10 Auto head broken check / AUTO HD CHK-------------------------------------------------- 5-38
5.4.2.11 WEB Printer / WEB PRINTER ----------------------------------------------------------------- 5-38
5.4.2.12 Ribbon near end / RBN NEAR END ---------------------------------------------------------- 5-38
5.4.2.13 External I/O mode / EX.I/O --------------------------------------------------------------------- 5-38
5.4.2.14 Paper / ribbon end / LBL/RBN END ---------------------------------------------------------- 5-39
5.4.2.15 MaxiCode specification / MAXI CODE ------------------------------------------------------- 5-40
5.4.2.16 XML -------------------------------------------------------------------------------------------------- 5-40
5.4.2.17 Threshold selection / THRESHOLD SELECT---------------------------------------------- 5-41
5.4.2.18 Print method / ENERGY TYPE ---------------------------------------------------------------- 5-41
5.4.2.19 Power save time / PW SAVE TIME ----------------------------------------------------------- 5-43
5.4.2.20 RIBBON WIDTH ----------------------------------------------------------------------------------- 5-43
5.4.3 LCD DISPLAY SETTING / PANEL ----------------------------------------------------------------------- 5-44
5.4.3.1 Language of LCD display / LCD LANGUAGE ----------------------------------------------- 5-44
5.4.3.2 Machine name / MACHINE NAME ------------------------------------------------------------- 5-45
5.4.3.3 Print page / PRINT PAGE ------------------------------------------------------------------------ 5-45
5.4.3.4 IP address / IP ADDRESS ----------------------------------------------------------------------- 5-45
5.4.3.5 Contrast adjustment / CONTRAST ------------------------------------------------------------- 5-45
5.4.4 Password setting / PASSWORD -------------------------------------------------------------------------- 5-45
5.4.4.
1 Boot display of system mode and user mode when password is enabled ------------ 5-46

Toshiba B-EX4 SERIES Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi
Max Print Width	104 mm
Connectivity	USB, Serial, Ethernet
Media Sensor	Transmissive, Reflective
Media Type	Roll, Fanfold, Tag, Ticket
Media Width	25.4 mm
Ribbon Width	110 mm
Ribbon Length	Up to 600 m
Media Thickness	0.06 – 0.19 mm