Toshiba B-EX4 SERIES - 5.8 RAM Clear Operations

5. SYSTEM MODE EO18-33027
5.8 RAM CLEAR
5-69
5.8 RAM CLEAR
 Outline of RAM Clear
In the RAM Clear mode, clearing the Maintenance Counter and initializing the Parameters are possible.
After replacing the print head, ribbon motor, or platen, perform maintenance clear.
Contents of RAM CLEAR menu
<B-EX4T1, B-EX4T2, B-EX6T2>
MENU ITEM
SYSTEM MODE
<6>RAM CLEAR
NO RAM CLEAR
MAINTE.CNT CLEAR
ALL COUNTER
FEED
PRINT
CUT
OTHER
PARAMETER CLEAR
QM TYPE
JA TYPE
CN TYPE
<B-EX4D2>
MENU ITEM
SYSTEM MODE
<6>RAM CLEAR
NO RAM CLEAR
MAINTE.CNT CLEAR
ALL COUNTER
FEED
PRINT
CUT
OTHER
PARAMETER CLEAR
QQ TYPE
QM TYPE
CN TYPE
NOTE: For the B-EX4D2 D1.1 or later, the displayed order has been changed as follows.
PARAMETER CLEAR
QM TYPE
QQ TYPE
CN TYPE
(NOTE)