Toshiba B-EX4 SERIES - 5.5 Adjust Set Options

5. SYSTEM MODE EO18-33027
5.5 ADJUST SET
5-47
5.5 ADJUST SET
 Outline of Printer Parameter Fine Adjustment
In the Printer Parameter Fine Adjustment mode, you can fine adjust each parameter, such as Print
tone, Print start position, Threshold, etc. which are set by the PC command. This is useful when using
several types of media by turns or when the print start position or cut/strip position is required to be fine
adjusted.
Contents of ADJUST SET menu
MENU ITEM
SYSTEM MODE
<3>ADJUST SET
FEED ADJ.
CUT ADJ.
BACK ADJ.
X ADJUST
TONE ADJ. (TRANS.)
TONE ADJ. (DIRECT)
RBN ADJ.<FW>
(*1)
RBN ADJ.<FW>
TYPE1
TYPE2
RBN ADJ.<BK>
(*1)
RBN ADJ.<BK>
TYPE1
TYPE2
THRESHOLD <REFL.>
THRESHOLD <TRANS.>
*1: Parameters depend on the model.
Applicable model
Parameter
B-EX4T1-G/T-QM/CN C1.2 or later
B-EX4T2-G/T-QM/CN C1.2 or later
B-EX4T2-H-QM/CN C1.1A or later
B-EX4D2-G/T-QM/CN D1.1 or later
RBN ADJ.<FW>
TYPE1
TYPE2
RBN ADJ.<BK>
TYPE1
TYPE2
Other than above
RBN ADJ.<FW>
RBN ADJ.<BK>
NOTE: This parameter is not used for the B-EX4D2-G/T.