Toshiba B-EX4 SERIES - Page 144

5. SYSTEM MODE EO18-33027
5.5 ADJUST SET
5-48
5.5.1 FEED ADJ.
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
50.0
-50.0
0.1
Decimal
Exist
2
1
None
mm
NOTE:
A value which is equal to or larger than the media pitch (FEED ADJ. ≥ Media pitch) must not be set. If
the set fine adjustment value causes the printer to feed the media backward from the print stop position
to the next print start position, the printer operation is not guaranteed.
+0.0 mm
+3.0 mm
Print start
position
One label
One label
Print start
position
-3.0 mm
One label
Print start position
Paper feed direction