Toshiba B-SA4TP SERIES - 6. PRINTER SPECIFICATIONS

6. PRINTER SPECIFICATIONS ENGLISH VERSION EO1-33048
6. PRINTER SPECIFICATIONS
E6- 1
6. PRINTER SPECIFICATIONS
This section describes the printer specifications.
Model
Item
B-SA4TP-GS12-QM B-SA4TP-TS12-QM
Dimension (W × D × H) 238 mm × 339 mm × 332 mm (9.4” × 13.3” × 13.1”)
Weight 26.5 lb (12 kg) (Media and ribbon are not included.)
Thermal direct 0°C to 40°C (32°F to 104°F)
Operating
temperature
range
Thermal transfer 5°C to 40°C (41°F to 104°F)
Relative humidity 25% to 85% RH (no condensation)
Power supply Universal power source AC100V to 240V, 50/60Hz±10%
Input voltage AC100 to 240V, 50/60Hz ±10%
During a print job 2.1A (100V) to 1.1A (240V), 155W rating Power
consumption
During standby 0.19A (100V) to 0.15A (240V), 13W (100V) to 22W (240V)
Resolution 8 dots/mm (203 dpi) 11.8 dots/mm (300 dpi)
Printing method Thermal transfer or Thermal direct
Printing speed
50.8 mm/sec. (2 inches/sec.)
101.6 mm/sec (4 inches/sec.)
152.4 mm/sec (6 inches/sec.)
Thermal direct 25.0 mm to 118.0 mm (1 inch to 4.6 inches)
Available media
width
(including
backing paper)
Thermal transfer 25.0 mm to 114.0 mm (1 inch to 4.5 inches)
Maximum effective print width 104.0 mm (4.1 inches) 105.7 mm (4.2 inches)
Issue mode Batch, Strip (option), and Cut (option)
LCD Message display 16 characters × 2 lines