Toshiba B-SA4TP SERIES - Page 80

2. PRINTER SETUP ENGLISH VERSION EO1-33048
2.10 Position and Print Tone Fine Adjustment
E2-66
2.10 Position and Print
Tone Fine
Adjustment (Cont.)
After selecting a fine adjustment value, press the [PAUSE] key.
Print Start Position Fine Adjustment
[RESTART]
[FEED]
FEED ADJ.+50.0mm
FEED ADJ.+49.9mm
FEED ADJ.+0.0mm
FEED ADJ.-49.9mm
FEED ADJ.-50.0mm
FEED ADJ.+0.1mm
FEED ADJ.-0.1mm
<3>ADJUST SET
FEED ADJ.+10.0mm
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
P
ressing the [FEED] key one time
causes a –0.1mm change, up to
–
50.0 mm.
P
ressing the [RESTART] key one
time causes a +0.1mm change, up
to +50.0 mm.
One label
Print Start Position
Print Start Position
3
mm
3mm
Feed Direction
Feed Direction
Print Start Position
One label
Feed Direction
One label
• Example of Print Start Position Fine Adjustment
When setting +3.0 mm
Compared with “+0.0mm” position, the print start
position is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position, the print start
position is shifted backward.